GKF GKT Drying Fan

Send Inquiry

Drying Fan – GKF/GKT series fan has characteristics of resistance to high temperature, large air volume, high pressure, energy-efficient, low noise, convenient maintenance, etc.

It is widely used in painting, tobacco, wood drying, production of rubber, production of pharmaceuticals, drying kilns, painting workshops, warehouses, basements, etc. As a gas transportation fan without corrosive gas, palpable & grayscale, the gas has no more than 150mg/m³ of dust and hard particles.

Axial Drying Fan has a novel structure, beautiful appearance, and superior performance.

Axial Drying Fan Applied Conditions

The maximum ambient temperature is no more than 130℃. The maximum relative humidity is no more than 98%.In the ambient of acid-deficient, alkalescent, steam, without combustible gas, the motor can be also used in the vacuum drying equipment, according to the specific conditions.

Standard Form

Power Form: Single phase:220V, Three phases: 220/380/660V, 230/400/690v 240/415
Frequency: 50/60Hz
Working Method: continuous (S1) periodic running in positive and opposite directions
Cooling Mode: ICO141, IC411(Totally Enclosed Fan-cooled)
Protection Class: IP55
Insulation Class: Class H (180℃）
HS Code: 8414599099

Main Features

Diameter: 250mm, 300mm, 350mm, 400mm, 500mm, 550mm, 600mm, 700mm, 800mm, 900mm and 1000mm
The angle of the fan can be adjusted according to the client’s requirements
The fan blades can be a direct connection to the motor
The circumferential velocity of the impeller does not exceed the condition, there are three different rotational speed:2900r/min,1450r/min, and 960r/min
Different Types: wall type, pipeline type, fixed type, square type
Motor: H class 180 ℃ high-temperature resistant
Fan Impeller: 4-8 pieces aluminum alloy blades
Customized high-temperature resistance
High-temperature grease is imported from Japan
Strict inspection before shipment

High-Temperature Motor

100% copper motor, with H class insulation (with modified polyester imine enameled wire).
According to the analysis methods of advanced thermodynamics, it not only reduces the electromagnetic loads of the motor but also increases the performance efficiency and energy saving.
The motor can be resistant to aging and burnout. It can be operated in high temperature and high humidity vapor environments.
The motor adopts an external structure injected with lubricating oil. It not only increases the service life of the bearing but also avoids the oillingdisassembly.
It is designed based on the characteristic of the blower-pump load, the shell adopts aluminum alloy material, and the fastening piece adopts stainless steel and copper, attractive appearance.
The motor structure adopts the straight shaft extension and subulate shaft extension, special grease lubricant resistant to high-temperature bearing, low noise, and small vibration.

Fan Blade: Aluminum alloy, 4-8 pieces, resistant to rust. Arc and right-angle blades to meet your different demands.

Leave your contact information to get a quotation!


GKF Series Axial Drying Fan
Item No.	Speed (rpm)	Motor No.	Power (KW)	Total Pressure (Pa)	Hydrostatic (Pa)	Air Volume (m³/h)	No. of Blades	Noise (dB)
2.5	2900	631-2	0.18	120-160	40-110	2200-1400	4	≤64
		632-2	0.25	130-170	50-116	2500-1500	4	≤65
	1450	631-4	0.12	55-60	20-28	1600-1000	4	≤59
3	2900	632-2	0.25	120-180	80-150	3200-1800	4	≤68
		633-2	0.37	140-200	90-170	3500-2000	4	≤68
	1450	631-4	0.12	60-80	30-60	2200-1200	4	≤61
3.5	2900	711-2	0.37	200-250	130-200	4500-2500	4	≤71
		712-2	0.55	250-280	150-220	5200-3000	4	≤72
	1450	711-4	0.25	80-100	35-65	3500-2200	4	≤63
4	2900	712-2	0.55	230-300	145-250	5500-3000	4	≤73
		801-2	0.75	250-330	145-270	6500-4000	4	≤74
		802-2	1.1	270-380	150-320	7500-5000	6	≤75
	1450	711-4	0.25	80-106	40-80	4300-2500	4	≤66
		712-4	0.37	100-120	50-95	5000-2800	6	≤68
		801-4	0.55	110-130	70-90	5200-3200	6	≤68
5	2900	90S-2	1.5	250-450	150-420	8500-5200	4	≤90
		90L-2	2.2	300-550	200-500	10000-6000	4	≤90
		100L-2	3	400-600	250-550	12000-7000	4	≤90
	1450	712-4	0.37	110-140	70-114	7000-4500	4	≤85
		801-4	0.55	115-150	75-120	7500-5000	4	≤70
		802-4	0.75	140-170	80-137	8700-5400	6	≤74
		802-4	0.75	190-210	110-170	9000-6000	8	≤75
		90S-4	1.1	200-220	135-175	9500-6000	8	≤76
	960	801-6	0.37	84-92	60-77	6300-4300	8	≤63
5.5	1450	802-4	0.75	180-210	120-160	10000-6500	4	≤74
		90S-4	1.1	190-210	125-165	11000-7500	6	≤75
	960	801-6	0.37	80-88	50-73	7300-5000	6	≤65
6	2900	100L-2	3	250-650	150-560	14500-8000	4	≤94
		112M-2	4	400-700	250-630	18000-10000	8	≤94
	1450	90S-4	1.1	195-220	130-180	12500-7500	4	≤76
		90L-4	1.5	250-280	160-230	14500-9000	6	≤78
		100L1-4	2.2	270-310	180-230	16000-10000	8	≤80
	960	801-6	0.37	90-100	70-80	8500-5000	6	≤66
		802-6	0.55	105-114	80-95	9600-6000	6	≤68
7	1450	90L-4	1.5	170-150	100-210	18000-11000	4	≤78
		100L1-4	2.2	200-275	120-230	20500-13000	4	≤80
		100L2-4	3	265-370	150-310	21500-13500	6	≤82
	960	90S-6	0.75	90-120	60-96	14000-9000	4	≤71
		90L-6	1.1	100-130	65-98	15000-10000	6	≤74
8	1450	100L1-4	2.2	200-320	100-280	25000-16000	6	≤80
		100L2-4	3	220-340	110-290	29000-20000	8	≤82
		112M-4	4	300-400	170-340	32000-22000	8	≤86
		132S-4	5.5	320-420	175-360	35000-25000	8	≤87
	960	100L-6	1.5	130-175	75-150	21000-14500	8	≤78
		112M-6	2.2	140-190	78-155	24000-16500	8	≤80
9	1450	132S-4	5.5	300-450	180-370	37000-24000	8	≤88
		132M-4	7.5	320-470	185-380	40000-27000	8	≤89
		160M-4	11	330-480	190-385	42000-30000	8	≤89
	960	112M-6	2.2	170-205	105-150	26500-15000	6	≤82
		132S-6	3	180-230	110-180	29000-18000	8	≤83
		132M1-6	4	210-250	127-210	32000-21000	8	≤83
		132M2-6	5.5	250-320	150-262	36000-23000	8	≤83
10	1450	132S-4	5.5	330-470	200-400	42000-34000	8	≤90
		132M-4	7.5	350-480	210-410	46000-38000	8	≤91
		160M-4	11	400-500	220-415	52000-43000	8	≤92
		160L-4	15	490-610	230-480	56000-46000	8	≤93
		180M-4	18.5	500-640	260-500	60000-48000	8	≤94
	960	132M1-6	4	200-230	130-180	33000-21000	8	≤85
		132M2-6	5.5	260-290	160-250	40000-27000	8	≤85
	730	132S-8	3	160-180	110-135	32000-20000	8	≤83
		160M1-8	4	170-200	115-145	38000-26000	8	≤83

GKF GKT Drying Fan

Related products

Login